Earphone, Microphone, & Headset Assemblies

   Earphone/Microphone Assemblies are designed to allow the user to connect either Hard-wire or Through-water communi- cations to a helmet or full face mask (ffm).  Due to the many styles of ffm on the market, we offer a wide variety.   The configurations can be endless depending on the application.  The following configurations are the most commonly used.  Custom Earphone/Microphone assemblies can be manu- factured upon request.  However, off the shelf assemblies will be more readily available.

  EMA-2 911060-001
This earphone/mic. assembly is design for all Interspiro ffm (pictured above).  It is configured with a HiUse connector, push-to-talk (PTT) button, Hot-Mic®, dual earphones (150 ohms), earphone holders and the Interspiro cover plate.  The PTT button is not used in Hard-wire applications.

 BP-1B 910059-000
Earphone assembly.   2 pin male AMP (Gripper ring) to 4 pin female AMP, all depth bone conductive earphone.

BP-3MA 910063-000
Earphone assembly.   2 pin male AMP (Gripper ring) 4 pin male marsh marine, all depth bond conductive earphone.

 EMX-2 911060-008
Ear/Mic. Assy.  Set up for EX0-26 w/dual earphones, PTT control, Hi-Use connector, Hot-Mic® (150 ohm) and operators manual (Can be used w/wireless or hard-wire systems).

 EMX-2B 911060-026
Ear/Mic. Assy.   Set up for EX0-26 (NEW STYLE/Oral-nasal) w/dual earphones, Hot-Mic® PTT control, Hi-Use connector (150 ohm) and operators manual (Can be used w/wireless or hard-wire systems).

 EMH-1 911060-009
Ear/Mic. Assy.  Set up for HM-2 mouth mask, single earphone, PTT control, Hi-Use connector Hot-Mic® (150 ohm) and operators manual (Can be used w/wireless or hard-wire systems).
 EMT-1 911060-010 Ear/Mic. Assy.  Set up for TEC-1 ffm, PTT control, single earphone, Hi-Use connector Hot-Mic® and operators manual (Can be used w/wireless or hard-wire systems).
 EMS-2 911060-017 Ear/Mic. Assy.  Set up for Scubapro ffm including Hi-Use conn., Hot-Mic®. (Can be used w/wireless or hard-wire systems).
EMO-2 900096-686  Ear/Mic. Assy.  Set up Ocean Edge ffm (Hi-Use connector & Hot-Mic®)(hard-wire or wireless).
 EP-1 911020-000 Earphone, bone conducting/all depth.  Earphone element to bare wires (10 ohm).
 EP-2 912003-000 Earphone, standard (ceramic) earphone to bare wire (10 ohm ).
 THB-13 910019-007 Headset, with adjustable boom mic. & built in PTT control (included in CDK-6 package).
TH-1 912081-000 Headset, w/o boom mic.   Designed for STX-100 (note: STX-100 has been discontinued).
 THB-101 900298-009 Headset, set up for the STX-101 Surface Transceiver.
THB-7A 910097-000 Headset, deluxe headset with boom mic.  Set-up for MK-7 BuddyLine®. Includes mini record plug.
 THB-A 900298-003 Headset, deluxe headset with boom mic.  Set up for MK2-DCI.
 THB-CBX 900298-002 Headset, deluxe headset with boom mic.  Set-up for Combox 1.
MP-450 910005-000  Microphone assembly, Hard wire mic.  Set up for Interspiro ffm (AGA)(floodable)(hard-wire only).
 HHM-1 912080-000 Hand-Held Microphone, comes standard with the STX-100 surface station.
HHM-2 910193-000  Hand-Held Microphone, comes standard with the STX-101 surface station.
 HHM-4 910041-000 Hand Held Microphone, comes standard with the STX-101M (Deluxe - Military).
 HSM-10 910041-000 Hand-Held Microphone, comes standard with the SSB-1000S & DRS-100 surface station.
 ME-08 910138-000 Microphone element. 08 ohm element w/stainless steel screws.
 ME-16R 912086-000 Microphone element (Hot-mic®).  150-ohm element floodable/noise canceling.

 Prices List GO  Wireless GO Hard-wire GO  Search/Rescue GO
 Order Form GO  Commercial GO Sport GO  Military GO

Undersea Systems International, Inc. dba
Ocean Technology Systems
3133 W. Harvard Street, Santa Ana, Ca. 92704 USA
Telephone: (714) 754-7848, Fax (714) 966-1639

Contact OTS: ots@oceantechnologysystems.com

 

Copyright 2003 Ocean Technology Systems