|
RCL-7
Multi-Charger
The RCL-7 Multi-Charging station is designed
to charge up to six (6) 1000DU or (6) 3000DU diver transceivers
with Nickel Metal Hydride double battery packs and (1) Digicom
1000 SU or 3000 SU surface station at the same time. The
RCL-7 has a smart circuit which ensures the batteries are charged
at the right rate and keeps them topped off when they reach the
full charge state. It also checks the batteries for shorted
or open cells. After all cells are checked and verified
they are OK, the unit kicks into the fast charge mode.
When voltage reaches a point the batteries are fully charged,
the unit goes into a maintenance mode. The RCL-7 is a must
for all diving commands who required batteries to be ready when
they need them.
Note:
The RCL-7 is designed to operate with the Digicom 1000m,
and 3000m diver and surface transceivers. The RCL-7A is
designed to operate with the OTS Aquacom STX-100, STX-101M, SSB-2010
& SSB-1001M transceivers.
Specifications for
RCL-7 Divex:
|
Input Voltage |
90 to 240 volts AC and 10 to 30
volts DC. |
|
Capacity: |
(6) 12 volt Nickel Metal Hydride
double battery packs & (2) 6 volt gell cell batteries installed
in the 1000DU, 3000DU, STX-101, or STX-101M. |
|
Nickel Metal Hydride: |
Each pack is (2) 12 volt, 1.5 amp
hour packs wire in parallel. |
|
Accessories: |
AC cord with IEC 320 connector to
bare wires. Surface station interface cable, DC interface cable,
DC interface cable w/large crocodile clips, |
|
Dimensions: |
H-6.5", W-14", D-10.6". |
|
Housing Material: |
ABS (UK Housing). |
|
Related Products Chart
|
SSB-1001B Aquacom® |
GO |
STX-101 Aquacom® |
GO |
STX-101M Aquacom® |
GO |
|
SSB-2010 Aquacom® |
GO |
Digicom 1000 SU |
GO |
Accessories |
GO |
|
Digicom 1000 DU |
GO |
Price List |
GO |
RCL-7A |
GO |
Specifications subject to change without prior notice. |
|
