Generic filters
Exact matches only

Buddy Phone Through-Water Transceivers (1/2 Watt Output Power)

The Buddy Phone® D2 is a digital, micro-miniature, ultrasonic transceiver allowing communication between two or more scuba divers and / or surface stations.

(Sold Separately, Does Not Include FFM)

$999.00$1,199.00

Recommended Add-Ons

Spare Parts Kit for Buddy Phones (SPAR-2B)

Model#: 900182-007
Spare Parts Kit for all Buddy Phones

Includes : (1) O-Ring & (1) Battery Cap

SKU: 900XXX-XXX Category:
warning WARNING: This product can expose you to chemicals including Chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Description

Using “Digital Signal Processing” (DSP) techniques, the Buddy Phone produces uncompromising speech clarity.The Buddy Phone® D2 differs from our standard Buddy Phone in that it is digitally controlled and has some fantastic features such as: a voice menu to guide you adjust your Volume, change from Channel A to Channel B, or put the Buddy Phone in a continuous voice transmission mode.

Voice Menu: When you submerge with a D2 Buddy Phone, you will hear the voice system say “Buddy Phone ON, frequency A (B), channel one (four), volume High (Medium, Low),” depending on the prior dive’s settings. Changing a setting is easy and can be done while underwater. Depress the Push-to-talk switch (PTT) three times quickly and hold the third depression until you hear “main menu – volume, channel, continuous transmit.” When you hear the main menu selections, simply depress the PTT to select one of the choices. The unit will make the selection and go back to the receive mode. If you don’t make a selection after the menu repeats twice, the D2 Buddy Phone goes out of the main selection menu and back to the receive mode (see operators manual for a more detailed explanation — note: continuous transmit mode allows the user to talk, hands free. This was requested by many movie makers and scientists who talk on camera often).

In all, this D2 Buddy Phone is State-of-the-Art and OTS technology at its best.

Specifications

Specifications
Nominal Range 50 to 500 meters depending on sea conditions & noise levels.
Transmission Type Ultrasound using upper single sideband (USB)
Transmit Output Power 0.5 watts PEP
Standard Frequency (PEP) Recall & tone: Freq. A (Channel 1): 32.768 kHz USB
Freq. B (Channel 4): 31.250 kHz
Audio Bandwidth 300 to 3,000 Hz
Automatic Gain Control Greater than 80 dB
Earphone Ceramic
Microphone High Quality Microphone
Transducer Ceramic cylinder
Battery Type: Alkaline 9V. Batteries not included
Maximum Operating Depth 130 feet in sea water (fsw)
Weight in Air 8.1 oz

Downloads

Buddy Phone® D2 User Guide – All Masks (rev. B)

Videos

Reviews

There are no reviews yet.

Be the first to review “Buddy Phone Through-Water Transceivers (1/2 Watt Output Power)”

Your email address will not be published. Required fields are marked *